Steam sterilization of spices, dried
vegetables and herbs: the path to producing
Ready to Eat products
Request sterilization
Steam sterilization is the key to producing safe spices
and botanical raw materials that meet the requirements
of the ready-to-eat market.
among food ingredients
At first glance, ingredients such as familiar, dry and aromatic products seem completely safe. However, it is precisely their dryness that helps dangerous microorganisms survive in them and “come back to life” once they get into moist food.
Studies show that the microbial count in store-bought ingredients can reach 100,000 CFU/g. The most common pathogens are Salmonella and Bacillus cereus, as confirmed by WHO and FAO data.
Using untreated ingredients in ready-to-eat dishes creates serious health risks. In this situation, steam sterilization becomes a necessary measure to ensure product safety.
Preparation. Heating and moistening to create optimal sterilization conditions
Product feed. Automatic feed of the product into the sterilization module
Sterilization. Steam heat treatment under controlled parameters
Discharge. Cooling and discharge of the sterilized product
By their natural origin, ingredients inevitably contain microflora from soil, water, air and production premises; this is natural for botanical raw materials. Food manufacturers have to deal with a whole range of dangerous microorganisms:
Spore-forming bacteria (Bacillus cereus, Clostridium perfringens)
These microorganisms can form spores that easily survive boiling and conventional heat treatment. Once in food, the spores can germinate and produce dangerous toxins that can cause food poisoning. They are especially critical for products without further processing.
Salmonella
Salmonella is one of the most resistant pathogens and can survive in dry spices such as pepper or fenugreek for many months. When the spice gets into a ready meal, Salmonella quickly becomes active and causes serious foodborne infections.
Molds and yeasts
Mold spores and yeast cells are inevitably present in almost every batch of raw material. In addition to the risk of spoiling the spice, some molds can produce persistent mycotoxins, carcinogenic substances that are hazardous to health and are not removed by ordinary cooking.
Listeria and enteric bacteria
Listeria, E. coli and coliform bacteria are indicators of fecal or soil contamination of raw materials. They can cause severe foodborne infections and are especially dangerous for products intended to be eaten without further heating.
how it works and why it is effective

Steam sterilization is a thermal decontamination method that uses saturated steam under pressure. On contact with the surface of the ingredients, the steam condenses and releases a large amount of latent heat. This local “heat shock” quickly heats every particle of the product, killing the microorganisms.

The high temperature of the steam causes irreversible changes in bacterial cells: proteins are denatured, enzymes are destroyed and cell membranes are damaged. Even highly resistant bacterial spores lose viability when exposed to steam at the right temperature and pressure.

Modern technologies such as HTST (High-Temperature Short-Time) make it possible to treat ingredients with steam at a high temperature in a very short time. For example, Ventilex units use pressurized steam at 110–130 °C. For comparison: at 95 °C, Bacillus cereus is inactivated in 3 minutes, while at 115 °C it takes only 2 seconds. The entire sterilization process can take about 15 seconds: fast, effective and safe for the product.
Bacillus cereus and Clostridium perfringens spores are considered among the most resistant contaminants of food raw materials. Steam sterilization with HTST technology combines high pressure and temperature, which makes it possible to “break” the spore coat and destroy up to 99.999% of microorganisms in this group, that is, to achieve a 5 log reduction.
Mold spores and yeast cells are less resistant to moist heat than bacterial spores: saturated steam destroys their cell membranes and proteins already at the lower end of the 110–135 °C operating range. The treatment removes the risk of batch spoilage and subsequent mycotoxin accumulation, while the short exposure time preserves the color and aroma of the raw material.
Salmonella does not form spores, so it dies faster than spore-forming bacteria. In HTST mode, a few seconds of contact with saturated steam are enough to achieve at least a 5 log reduction and prevent the pathogen from becoming active when the spice gets into a ready meal.
E. coli, Listeria and coliform bacteria are vegetative forms and indicators of fecal and soil contamination. Saturated steam under excess pressure destroys them throughout the entire volume of the product, including the internal pores and cavities of the particles, and the result is confirmed by laboratory testing of each batch.
For Ready to Eat (RTE) products, ingredients must be safe even without further heat treatment. This requires strict quality control, mandatory laboratory testing, a HACCP system and validated steam sterilization. This approach simplifies declaration under EAEU technical regulations and ensures compliance with current market requirements.
Several ingredient decontamination technologies are available on the market. Each has its own capabilities and limitations:
| Method | Effectiveness against spores | Effect on aroma | Status in the EU/Russia |
|---|---|---|---|
| Steam sterilization (HTST) | High | Minimal with HTST | Permitted, preferred |
| Ethylene oxide (EO) | High | None | Banned in the EU |
| Ionizing radiation | High | Possible changes | Restricted in some countries |
| UV treatment | Medium (surface only) | None | Permitted |
| Microwave sterilization | Medium | Minimal | Permitted |
A steam sterilization plant follows a strict process chain: raw material intake → treatment with sterile steam → holding at set parameters → cooling → hermetic packaging.

Temperature: 110–135 °C
01The exact treatment temperature is selected individually for each type of raw material, taking into account its resistance, particle size, essential oil content and the target level of decontamination. This temperature range effectively destroys most pathogens, including bacterial spores, without loss of product quality or properties.

Pressure: excess
02Saturated steam under excess pressure allows heat to penetrate the complex structure of the ingredients and reach every particle of raw material, including internal pores and cavities. This is necessary to really destroy microorganisms throughout the product, not just on the surface.

Exposure time: from 2 seconds to several minutes
03In HTST (High-Temperature Short-Time) mode, the minimal treatment time (2–15 seconds) achieves highly effective sterilization without a negative effect on sensory properties. Some traditional processes require longer exposure, up to several minutes, depending on the density and properties of the raw material.

Reduction: at least 5 log
04The target pathogen reduction is 5 log, meaning the number of viable microorganisms is reduced 100,000-fold (99.999%). This level meets the strictest requirements for Ready to Eat products and ensures maximum safety of the final product.
and manufacturers
- A wider range: The line-up includes more RTE products: sauces, marinades, ready meals.
- Meeting the requirements of large clients: Compliance with the standards of retail, HoReCa and export markets.
- Lower risk of recalls: Less chance of contamination, losses and reputational damage.
- Long shelf life: A minimal microbial load extends shelf life.
- Premium positioning: Safe ingredients open up opportunities for premium-safe private labels.
the industry standard
In food microbiology, a 5 log (99.999%) reduction in microbial load is a recognized measure of sterilization effectiveness: no more than one out of 100,000 bacteria survives. Modern steam sterilization systems consistently achieve this level.
The threshold is higher for pharmaceuticals, but for RTE food products 5 log is the generally accepted and sufficient standard that ensures safety.
An important aspect is mandatory process validation with documented parameters and results. Without such validation, it is impossible to reliably claim Ready to Eat status to regulators and partners.
Products meet all RTE standards (TR CU, HACCP, EU)
Production safety = minimum recalls
and maximum reputation
An advanced range (marinades, dressings, products for sports nutrition and HoReCa)
Access to export
and the premium segment
Fill in the form and our manager will contact you shortly



